Any chance of getting this patch in before 2.4.26 final?

This patch is needed for compiling 2.4 with recent versions of gcc, such as the gcc 3.3.3 hammer branch or gcc 3.4. The gcc developers changed the name of the attribute that indicates that something is actually needed, even though gcc can't see why, from "__unused__" to "__used__". This patch copes with that.

The patch is from Stephen Rothwell. He discovered the problem on ppc64, but in fact it would exist on any architecture.

You can download the set of experimental reiserfs v3 patches from:

ftp://ftp.suse.com/pub/people/mason/patches/reiserfs/2.6.5

Since some of these are in -mm and some are not, there are two series files. series.linus gives you the patches needed for mainline 2.6.5, and series.mm gives you the patches needed for 2.6.5-mm1

Most of these are from Jeff Mahoney and I, they include:

bug fixes
logging optimizations
data=ordered support
xattrs
acls
quotas
error messages with device names (based on Oleg's 2.4 patch)
block allocator improvements

Jeff Mahoney's acls and xattrs for reiserfs v3 have been in use in the suse 2.4 kernels and now 2.6 kernels for a while. I've posted for review to namesys many times, but Hans refuses to consider or read the code. I renewed my efforts over the last month to talk with him about the code, but he has ignored it entirely.

His past objections seem to be that he doesn't want new features in v3. The implementation does not change the disk format in any way (xattrs are stored as regular files in a hidden directory) and is stable. I believe reiserfs needs these features in order to stay current in the kernel, so I'm posting for inclusion in -mm. I'm sending Andrew the following patches from series.mm:

reiserfs-end-trans-bkl
reiserfs-acl-mknod.diff
reiserfs-xattrs-04
reiserfs-acl-02
reiserfs-trusted-02
reiserfs-selinux-02
reiserfs-xattr-locking-02
reiserfs-quota
permission-reiserfs
reiserfs-warning

(which is everything except the new block allocator code)

The block allocator improvements is our attempt to reduce fragmentation. The patch defaults to the regular 2.6.5 block allocator, but has options documented at the top of the patch that allow grouping of blocks by packing locality or object id. It also has an option to inherit lightly used packing localities across multiple subdirs, which keeps things closer together in the tree if you have a bunch of subdirs without much in them.

If anyone is interested in experimenting with the block allocator stuff, please let me know.

There are a few different sides to the block allocator work.

1. don't ruin what the current allocator is good at (desktop esp). A sequential tree read of freshly copied data is really fast right now. It could be a little better with some metadata readahead, I'm still trying to safely revive that code.

   The patch tries to keep performance for a full tree read by with the -o packing_groups option. The basic idea is to reuse bitmap groups for new subdirectories until the bitmap group is full. This is done by checking to see how full a given part of the btree is.

2. Improve the fragmentation under multiple writers. With 20 writers, the default allocator breaks down, fragmenting badly (20% or so). The patch with -o alloc=skip_busy:dirid_groups on makes things sane (3%).

   So, to help test, you need some way of measuring fragmentation and a whole bunch of benchmarks. I like fibmap: (http://www.informatik.uni-frankfurt.de/~loizides/reiserfs/fibmap.html)

   But Andrew has a fragmentation tool in the ext2 cvs I think.

quite a while back, I sent out email about adding Page Attribute Table support to the kernel (http://www.kerneltraffic.org/kernel-traffic/kt20030616_219.html#3).

At the time, the concern was being able to mark remapped i/o pages Write Combined in the case that we ran out of MTRRs to do so. This was mainly for the agp aperture and framebuffer. With PCI Express systems coming out, the need changes slightly. PCI Express does not have a centralized aperture like agp that can be marked WC. Instead, individual system pages of memory need to be marked WC via PAT in the page tables. This significantly increases the need for PAT support under linux to maintain high performance levels on PCI Express systems.

I thought the best approach would be to handle some of the original feedback in the code before I came backto ping lkml. I discussed things a little offline with Andi Kleen. He suggested I focus on the simpler i/o regions first, then come back to handling main memory once I had that done and had gotten feedback on it.

I've worked on a mechanism (cachemap) to track what type of caching a region of memory is currently mapped as. when a new region of memory is mapped, cachemap is queried to make sure the new region's caching type matches the old type (or is compatible with the old type). if the cachemap query succeeds, it's safe to map the new i/o region, otherwise it's not safe.

for the first pass, I focused on testing ioremap. so the cachemap queries are only made from ioremap. I also added code to have the mtrr code call the cachemap code (in this case, it's a report rather than a query to indicate the mapping's already made). I've made a few test runs on systems here, and it seems to work fairly well.

this current patch includes the original PAT support and the new cachemap mechanism. note that the cachemap mechanism does not actually change any caching attributes, it only keeps track of the attributes and tests regions. I think the end idea would be that drivers would use the normal ioremap/change_page_attr/remap_page_range mechanisms like they already do, and these mechanisms would in turn use cachemap to make sure there's no conflicts. I'm completely open to how any specific details should work, and any changes needed to be made.

As for an interface - i still think it would be cleaner to just call it from change_page_attr(). Then other users only need to call a single function. But that's easily changed.

To make it really useful I think we need ioremap_wrcomb() and support in the bus/pci mmap function (the PCI layer already has ioctls for this, they are just ignored on i386 right). Then the X server could start using it.

Without any users the testing coverage would be probably not too good, but it needs some testing in the real world before it could be merged first. Maybe it could be simply hooked into the AGP driver and into some DRM driver. Then people would start testing it at least.

This would also be extremely useful on machines with large amounts of memory, for write-back mappings. With large amounts but odd sized entries it becomes extremely tricky to map all of the memory using mtrrs.

Last I looked the common remedy was to using overlapping mtrrs which the kernel does not understand and that make it impossible for X to setup write-combining MTRRs.

The memory map on x86 shows no hope of getting simpler and mtrrs are getting continually less good at being able to scale so getting PAT support of some kind in the kernel would be extremely good.

I already had vendors complaining about this. But for this it will need some more work - the MTRRs need to be fully converted to PAT and then disabled (because MTRRs have higher priority than PAT). Doing so is a lot more risky than what Terrence's patch does currently though. But longer term we will need it.

Also it will still need to handle overlapping ranges. I suppose it will need some simple rules like: converting from UC to WC is always ok.

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.5/2.6.5-mm5/

• More CPU scheduler work. Hopefully this kernel will now address the regressions that a few people have noted on certain workloads. We appear to be getting close.
• Various fixes, cleanups and code shrinkages.

Actually I do _not_ want to do that. The reason for that is that I want to add yet another layer before compression, which would interleave real data with random bytes. These random bytes are not drawn uniformly but rather drawn as to make the distribution on huffman trees (and thus on the encodings) uniform. This ensures that in order to decode my real data, an attacker has to decode the random data first; but since all _compressed_ random sequences are made equi-probable, there is (hopefully) no better way for him to do this than brute force. This is the idea I have (successfully ?) implemented in http://jsam.sourceforge.net .

Thus I still want to "compress" my data even if its size grows.

The problem I encounter however is that if forcibly allocating more space than required (e.g. 9 plain blocks every 8 compressed blocks) I will need padding. However padding is generally unwise cryptographically speaking ...

Makes sense. One of the zlib developers actually calculated the maximum expansion when zlib-compressing data, so you could even get away with more than 50% net size, but that makes the code more complicated. Your call.

Performance should not be a big issue, as encryption is a performance killer anyway.

Whether it is acceptable depends on the user. Make it optional and let the user decide.

I was referring to the paper by Jeffrey Scott Vitter "Design and Analysis of Dynamic Huffman Codes" (accessible through http://acm.org). It defines a refinement of the well-known dynamic Huffman algorithm by Faller, Gallager and Knuth such that the encoded length will use at most _one_ more bit per encoded letter than the optimal two-pass Huffman algorithm (it is also shown that the FGK algorithm an use twice the optimal length + on more bit per letter).

My conclusion comes from the fact that for every text, the optimal two-pass huffman encoding can _not_ be longer than the native encoding (apart from the dictionnary encoding).

Actually I plan to implement the easier FGK algorithm first - if the whole matter makes sense.

In addition to the hugetlb commit handling that we've been working on off the list, Ray Bryant of SGI and I are also working on demand paging for hugetlb page. Here are our final version that has been heavily tested on ia64 and x86. I've broken the patch into 3 pieces so it's easier to read/review, etc.

1. hugetlb_fix_pte.patch - with demand paging, we can not unconditionally assume valid pmd/pte. Fix it up in arch specific huge_pge_offset() and have all caller check the return value.
2. hugetlb_demand_generic.patch - this handles bulk of hugetlb demand paging for generic portion of the kernel. I've put hugetlb fault handler in mm/hugetlbpage.c since the fault handler is *exactly* the same for all arch, but that requires opening up huge_pte_alloc() and set_huge_pte() functions in each arch. If people object where it should live. It takes me less than a minute to delete the common code and replicate it in each of the 5 arch that supports hugetlb. Just let me know if that's the case.
3. hugetlb_demand_arch.patch - this adds additional arch specific fixes for x84 and ia64 when generic demand paging is turned on. Also bulk of the patch is to clean up with functions that no longer needed.

Some caveats: I don't have sh and sparc64 hardware to test. But hugetlb code in these two arch looked like a triplet twin of x86 code. So I'm pretty sure it will work right out of box. I've monkeyed around with ppc64 code and after a while I realized it should be left for the experts. I'm sure there are plenty ppc64 developers out there that can get it done in no time.

Patches relative to linux-2.6.5-mm4 and on top of hugetlb overcommit handling patch posted by Andy Whitcroft.

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.5/2.6.5-mm6/

• Added the first cut of the ext3 "reservation" code - it improves layout of ext3 files, especially on SMP hardware.
• Various small fixes and cleanups

Jeff Garzik sent me a SATA update to be merged in 2.4.x.

A lot of new boxes are shipping with SATA-only disks, and its pretty bad to not have a "stable" series without such industry-standard support.

This is the last feature to be merged on 2.4.x, and only because its quite necessary.

Any oppositions?

I'm working at a company called Coverity where we are building an industrial strength derivative of the MC Checker system created at Stanford. I've written a static analysis checker that looks for places where the kernel gets a scalar from the user and then uses it without performing bounds checks. For example, if a driver copies in an integer from the user and then uses that integer as an array index or the length argument to memcpy, the user can cause a buffer overflow.

The error reports below are sorted roughly by their severity. The last 12 of the errors are fairly minor because they are either protected by a capable() check or the scalar is only 8 bits. I also consider it to be a minor error to pass an unchecked value to kmalloc(). I realize that kmalloc() will fail when asked for more than 128k, but it may not be appropriate to allow the user to allocate that much memory. All of these minor errors will be marked by [MINOR] and/or [CAPABLE] tags in the error report.

• All of the anonmm rmap work is now merged up. No pte chains.
• Various cleanups and fixups, as usual.
• The list of external bk trees is getting a little short, due to problems at bkbits.net. The ones which are here are not necessarily very up-to-date with the various development trees.

I confess to being moderately exhasperated at the amount of talk and patching going on in the bitmap and cpumask areas. So when your patch floated past with a terse description which was bristling with ifs, buts and maybes I decided to take a pass.

If you want to send it again, cc'ing your co-conspirators and imparting some confidence that this darned thing is actually meandering toward a conclusion, please feel free ;)

Some fixes for PS/2 mice:

• fixed hotplugging (real reset of device instead of softreset)
• support for Targus Scroller mice (from my last weeks patch)
• extended protocol probing fixed

The major change is that the probing of extended protocols is now changed to be more configurable. Previously the driver probed for all the protocols it knew about and stopped when it found one that the mouse accepted. This didn't work with a bunch of mice so now you can choose the protocols which are to be probed.

In current 2.6.5 the parameter "proto=imps" probes all protocols up to ImPS/2. The patch changes this so that "proto=imps" ONLY probes for ImPS/2 and if that fails uses regular PS/2. Similarly "proto=ps2pp,genps,exps" probes for Logitech, Genius and Intellimouse Expolorer and if none found uses the bare PS/2.

Building external modules

kbuild offers functionality to build external modules, with the prerequisite that there is a pre-built kernel avialable with full source. A subset of the targets available when building the kernel is available when building an external module.

Building the module

The command looks like his:

make -C <path to kernel src> M=$PWD

For the above command to succeed the kernel must have been built with modules enabled.

To install the modules just being built:

make -C <path to kernel src> M=$PWD modules_install

More complex examples later, the above should get you going in most cases.

Available targets:

make -C $KDIR M=$PWD

Same as if 'modules' was specified. See description of modules target below.

make -C $KDIR M=$PWD modules

Will build the module(s) located in current directory. All output files will be located in the same directory as the module source. No attemps are made to update the kernel source, and it is expected that a successfully make has been executed for the kernel.

make -C $KDIR M=$PWD modules_install

Install the external module(s)

make -C $KDIR M=$PWD clean

Remove all generated files in current directory

Available options:

make -C $KDIR

Used to specify where to find the kernel source. '$KDIR' represent the directory where the kernel source is. Make will actually change directory to the specified directory when executed.

make -C $KDIR M=$PWD

M= is used to tell kbuild that an external module is being built. The option given to M= is the directory where the external module is located. When an external module is being built only a subset of the usual targets are avialable.

make -C $KDIR SUBDIRS=$PWD

Same as M=. The SUBDIRS= syntax is kept for backwards compatibility.

make -C $KDIR M=$PWD help

help will list the available target when building external modules.

A more advanced example

This example shows a setup where a distribution has wisely decided to separate kernel source and output files:

Kernel src:
/usr/src/linux-<kernel-version>/

Output from a kernel compile, including .config:
/lib/modules/linux-<kernel-version>/build/

External module to be compiled:
/home/user/module/src/

To compile the module located in the directory above use the following command:

cd /home/user/module/src
make -C /usr/src/linux-<kernel-version> \
O=/lib/modules/linux-<kernel-version>/build \
M=$PWD

Then to install the module use the following command:

make -C /usr/src/linux-<kernel-version> \
O=/lib/modules/linux-<kernel-version>/build \
M=$PWD modules_install

The above are rather long commands, and the following chapter lists a few tricks to make it all easier.

Tricks to make it easy

TODO: .... This need to be rewritten......

A make line with several parameters becomes tiresome and errorprone and what follows here is a little trick to make it possible to build a module only using a single 'make' command.

Create a makefile named 'Makefile' with the following content:

---> Makefile:

all:
        $(MAKE) -C /home/sam/src/kernel/v2.6 M=$(PWD) \
                        $(filter-out all,$(MAKECMDGOALS))

obj-m := module.o

---> End of Makefile

When make is invoked it will see the all: rule, and simply call make again with the right parameters.

If a driver is being developed that is targeted for inclusion in the main kernel, an idea is to seperate out the all: rule to a Makefile nemed +makefile (lower capital m) like this:

---> makefile

all:
        $(MAKE) -f Makefile -C /home/sam/src/kernel/v2.6 \
                M=$(PWD) $(MAKECMDGOALS)

---> End of makefile

The kbuild makefile will include only a single statement:

---> Makefile:

obj-m := module.o

---> End of Makefile

When executing make, it looks for a file named makefile, before a file named Makefile. Therefor make will pick up the file named with lower capital 'm'.

Prepare the kernel for building external modules

When building external modules the kernel is expected to be prepared. This includes the precense of certain binaries, the kernel configuration and the symlink to include/asm. To do this a convinient target is made:

make modules_prepare

For a typical distribution this would look like the follwoing:

make modules_prepare O=/lib/modules/linux-<kernel version>/build

TODO: Fill out the following chapters

Module versioning

Local include files

CLFAGS := include ...

Binary only .o files

Use _shipped ...

I count 79 "Cset exclude" changelog entries since 2.5.4-pre1. Is there any way to identify the changelog entry they revert?

for instance, "Cset exclude: davej@suse.de|ChangeSet|20020403195622" is in 2.5.8-pre2, as the full text of the changelog entry.

Without a way to identify the particular entry being reverted, I can't rely on the fact that a particular changelog entry represents what actually went into the kernel.

I realize there is almost certainly no way to directly deduce which changelog entry is referenced by a particular 'Cset exclude' entry. But maybe there is some *indirect* way, perhaps a website somewhere that tracks this info?

you can construct a working URL by appending the cset key to
http://linux.bkbits.net:8080/linux-2.5/cset@

like so:
http://linux.bkbits.net:8080/linux-2.5/cset@davej@suse.de|ChangeSet|20020403195622

The High Resolution Timers patch for the 2.6.5 kernel has just been posted on sourceforge.

This patch provides an extension to the POSIX clocks and timers to define two new high resolution clocks (CLOCK_REALTIME_HR and CLOCK_MONOTONIC_HR). The resolution of these clocks can be set at CONFIGURE time, with the default being 10 micro seconds. The high res clocks can be used with clock_nanosleep() as well as with the POSIX timers.

This version uses apic timers to obtain much better accuracy and simplicity.

Ask your mail server admin. The only people who need to take action are the ones stupid enough to use spamcop's blocklist for outright mail blocking.

The spamcop site even says that their list probably shouldn't be used for outright blocking.

Reading SPAMCOP pages I think they are most unwilling to make any exceptions. Per this document:

http://www.spamcop.net/fom-serve/cache/298.html

The only way to handle this is to have smarter people, who are always vigilant enough to look deeply into the message headers and do realize that some spam has leaked thru VGER's lists. They may report those _ONLY_ to VGER's postmaster (several people), who can (to an extent) add keyword based filters to Majordomo.

Any single less savvy person receiving the list could still accidentally get VGER again listed in a number of spam-block lists.

Another would be to run the lists in fully CLOSED mode, which would still let a bunch of viruses thru... (filters are mostly biting on those already, though.) But it would be most nasty mode in other forms...

I'm confused -- the spamcopy info page you listed implies that hosts are listed if they are an _open relay_, which is a completely different thing from `spam leaking though VGER's lists.'

If VGER actually is an open relay, that's very bad, but presumably something easily solved by the machine's maintainers. Some spam getting through to VGER list recipients, on the other hand, is just annoying (and certainly shouldn't be the cause of any blacklisting).

The spamcop report page seems to say that the listings are due to user reports; could the real problem be clueless users who don't understand the difference above?

Does anyone have a better idea of what's actually going on?

While most of the spamcop administrators seem pretty smart, their system definitely is vulnerable to the "Garbage In, Garbage Out" principle.

I'm certain than vger got listed on spamcop due to linux-kernel subscribers reporting to spamcop some of the spam that leaked onto lkml, through Matti's strict filters.

I wouldn't be surprised if some of those same users were now complaining they couldn't get their linux-kernel email. ;)

In my opinion, there are only two types of anti-spam lists that can be responsibly used:

• lists run by people smart enough to recognise that they make mistakes and are willing to correct them whenever they happen
• lists run in an entirely automated fashion, with no human input whatsoever -- but only when the software is administrated by people willing to correct problems that happen

Lists that take the philosophy of "sorry that was our mistake, but we're still not going to make an exception" probably aren't the right lists to use if you care about your email.

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6-rc2/2.6.6-rc2-mm1/

• Several framebuffer driver fixes. Please test.
• Input driver fixes, cleanups, features.
• Dropped the signal race fixes. See if we can find a better way to fix this.

ELSA (Enhanced Linux System Accounting) announce http://elsa.sourceforge.net.

The goal of accounting is to collect and report the use of various system resources by applications. Informations, like process time, CPU usage, connect time or disk space usage, provides data that helps the system to adjust the use of resources between processes.

The current BSD-like process accounting that already exists in Linux collects informations on individual users or groups of users. The ELSA project aims to improve and extend the monitoring of resources with different criteria like groups of processes. Another target for this project is to give Linux an homogeneous set of commands for all kinds of accounting (memory, CPU and I/O).

Here is the state of the art about ELSA (Enhanced Linux System Accounting).

• Concerning the documentation:
  • All drafts can be access at http://sourceforge.net/docman/?group_id=105806
• Concerning the code:
  • The structure "bank" allowing to manage groups of process is based on Linux kernel 2.6.5
  • A test program is provided making it possible to validate our implementation.
  • Currently, these structures can be handled by a user via the system call elsa(). A functional patch is provided on the web site http://sourceforge.net/project/showfiles.php?group_id=105806
• Concerning the CVS:
  • The module structure is a little tricky because we have created some useless repositories. Anyway, there are 4 modules which are:
    • modifs_kernel: contains modified files for a Linux kernel 2.6.5. We don't support versions 2.4.x for the moment but if it's needed, it's easy to port.
    • tests: a program that allows to test the "bank" and a basic Makefile to build the test.
    • drafts: contains the documents relating to ELSA.
    • scripts: Scripts can manage an environment of work. It just copies files between environments. It's more for a personal use.
  • There are also two unused modules which are:
    • elsa
    • Documentation

I'm slowly and (somewhat) quietly cleaning up the libata internals. This is allow several interesting features to appear in rapid succession: hotplug, random taskfile submission (SMART!), and ATAPI.

This is the first step in cleaning up the internals. Nothing terribly interesting for existing users, except for one key change:

Promise SATA driver has been split. Promise TX2/TX4 SATA remains in "sata_promise". The very-different Promise SX4 support is now found in a new driver "sata_sx4". Promise users, please test and make sure I didn't break anything. It seems to work on my Promise SATA h/w.

Linux 2.6.x patch and changelog:
http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/2.6.6-rc2-bk3-libata1.patch.bz2
http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/2.6.6-rc2-bk3-libata1.log

Linux 2.4.x patch and changelog:
http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/2.4.27-pre1-libata1.patch.bz2
http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/2.4.27-pre1-libata1.log

BitKeeper repositories:
http://gkernel.bkbits.net/libata-2.4
http://gkernel.bkbits.net/libata-2.6

Ok, there it is (well, the tar-file and patches are still being up-loaded, but should be there soon).

NTFS, XFS, FAT and CIFS updates. IDE cache-flush at shutdown fixes. ppc, sparc, s390 and ARM updates (and a few x86-64 fixes).

Holler if I missed anything.

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6/2.6.6-mm1/

• x86_64 sched-domains support
• Added the sysfs-backing-store patches

• A number of patches to shrink/consolidate dentry fields. Needs careful testing. The relevant diffs are:

  d_flags-locking-fix.patch
  d_vfs_flags-locking-fix.patch
  dentry-shrinkage.patch
  dentry-qstr-consolidation.patch
  dentry-qstr-consolidation-fix.patch
  dentry-d_bucket-fix.patch
  dentry-d_flags-consolidation.patch
  dentry-layout-tweaks.patch

• The ia64 CPU hotplug stuff is all here now and doesn't appear to break anything.
• Lots of fixes/cleanups/etc.

It's removed because Peter seems to not want to support it any more, and there didn't seem to be any usage. But if people out there are actually using it, and somebody wants to support it _and_ it is in good working state for 2.6.x, we could certainly bring it back to life.

But if you only do this because you want to fix warnings that people have posted about the sources, and you're not actually seriously using it and maintaining it, then I'll just apply this patch against plain 2.6.6 (so that it doesn't go away if somebody wants to resurrect it later).

In other words - holler if you want to seriously support it. We're not deleting it to be spiteful..